WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 Degrees

Buy WH-W1315 Digital Temperature Controller K Type Thermocouple Temperature Control Board -30~999 Degrees

Feature:

Product Name: Digital temperature controller

Specification Model: XH-W1315

Input voltage: DC12V/24V/AC220

Motherboard power consumption: 3W

Temperature control range: -30~999C

Measurement input: K-Type thermocouple

Temperature measurement accuracy: 1°C

Temperature measurement accuracy: +-2 °C

Output type: one-way relay output

Display window: 38 x 20mm

Overall size: 79 x 51 x 27mm

Code	Code description	Setting range	Factory setting
P0	Mode setting	Cooling C / Heating H	H
P1	Backlash setting	1-50°C	5°C
P2	Temperature correction	-20~20°C	0
P3	High temperature alarm	0-999°C	OFF

P0 working mode

This value must be set when the thermostat is used for the first time. If it is used for heating, it should be set to H. If it is used for cooling, it should be set to C.

P1 hysteresis setting

Press and hold the setting button for 3 seconds to enter the internal menu and select P1. Press the setting button again to enter the hysteresis value setting state. The hysteresis will start again after the set temperature stops. The default is 2. If you want to modify, press and hold SET to enter P1 mode to modify.

P3 temperature correction

When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value

P4 high temperature alarm

When the measured value is greater than this value, the screen temperature flashes and drip sound alarm, and the temperature control is forcibly disconnected, and the high temperature alarm closing signal is output to remind the user to take measures. Note that the output is the relay closing signal, and the alarm power supply can be connected in series on the output.

Package includes:

1 x Digital temperature controller